We are here to support you during this COVID-19 pandemic by accepting online orders and delivering them all across UAE in a safe manner. Deliveries may be delayed.
Smart Switch. And then some.
Whatever it’s wired into is at your control. Heavy Duty Smart Switch can be controlled on demand via Z-Wave remote controls, apps and gateways.
Electronics don’t always have to be turned, just when we need them. Heavy Duty Smart Switch lets you automate and schedule the operation of the high-power devices wired into it.
High-power electronics tend to be those that cost the most amount of money to run. Heavy Duty Smart Switch can calculate and report your spend in watts and kilowatt hours in real-time.
In the event of an emergency, Z-Wave can be used to turn off the electronics that Heavy Duty Smart Switch are connected to. That’ll help prevent further damage to the electronics and your home.
Whoever handles it, they’ll have Heavy Duty Smart Switch installed like a pro in no time. They’ll need a screwdriver and a wirestripper; everything else comes in the box. After safely turning off the power, they’ll install Heavy Duty Smart Switch inline, stripped the wires, and attaching the provided wire terminals to the power cable and to Heavy Duty Smart Switch. There isn’t much more to do, and you can read the installation instructions in advance here.
More has been done to Heavy Duty Smart Switch than simply waterproofing it for outdoor use. It’s also been crafted with all the technology necessary for it to perform outdoors flawlessly; a long-range antenna capable of communicating over 150 metres (490 feet) outdoors, and a Z-Wave repeater so that it can also communicate with other Z-Wave devices installed outdoors.
Capable of rebroadcasting Z-Wave and Z-Wave Plus signals.
Communicates outdoors over 150 metres / 490 feet.
Rated to IP44 for indoor or outdoor use.