Buy AirThings Living Room + Bedroom Indoor Air Quality Monitor Now

Start your indoor air quality journey with monitors that cover two of the rooms where you spend the most time at home.

Gain visibility over air quality

View Plus for living room

Enjoy broad visibility into your home's air quality in the comfort of your living room. Monitor your exposure to radon, as well as the concentration of particulates and gases, temperature, and humidity – all while spending time with your loved ones.

Wave Plus for bedroom

With Wave Plus in your bedroom, you'll learn if your air is sufficiently ventilated and if other invisible factors might be affecting your sleep.

Airthings app

Check live readings, analyze trends using sophisticated graphs, configure notifications and get air quality tips.

Wifi connectivity

Check your live data anytime and receive timely air quality notifications wherever you are.

Multiroom coverage

Place your Wave Plus in one room, your View Plus in another. Check all your information in the app.

View Plus

• Sensors: Radon, particulate matter (PM2.5), Carbon dioxide (CO2), temperature, humidity, airborne chemicals (VOC), air pressure
• Display: 2.9” 296128 pixels ePaper
• Visual indicator: Red/yellow/green glow indicator
• Long battery life: Up to 2 years (depends on sensor interval and WiFi router)
• Optional operation on USB-C (runs from batteries if removed)
• Supports wall mounting or placement on table
• Wireless connection: WiFi or Airthings SmartLink (with Hub)
• Bluetooth for on boarding and daily use configuration
• Hub functionality: Enabled when connected with WiFi and USB-C cable is plugged into device (not compatible with Wave Radon 1st Gen SN: 2900xxxx)
• Radon sampling: Passive diffusion chamber
• Detection method: Alpha spectrometry
• Measurement range: 0 – 500 pCi/L / 0 – 20,000 Bq/m3
• Accuracy/precision at 5.4 pCi/L / 200 Bq/m3: After 7 days ~ 10 % After 2 months ~ 5 %
• Sensor sampling interval: 5 minutes
• Sensor Resolution: Temperature ∓ 0.1°C / F / Humidity ∓1% / Pressure ∓0.15hPa
• Initial calibration time: VOC ~7 days, CO2 ~7 days,
• CO2 details: NDIR Sensor (Non-Dispersive Infra-Red): Measurement range 400–5000 ppm, Optimum Accuracy ±50ppm ±3% within 10 – 35°C / 50 - 95°F and 0 – 80%RH after initial calibration time
• Particulate Matter (PM2.5) details: Laser scattering based optical particle counter, Particle size detection range: 300 nm to 10 μm, Range: 0~200 μg/m³, Measurement error (PM2.5): 0 ~100μg/m3, ±10μg/m3,100 ~200 μg/m3, ±10%. Calibrated with a GRIMM using cigarette smoke source
• Recommended operating conditions: Temperature: 4°C to 40°C / 39.2°F to 104°F, Humidity: 0% to 85% (non condensing)
• Power: 6 AA batteries or USB-C
• Connectivity: WiFi (2.4 GHz and 802.11b/g/n), Airthings SmartLink & Bluetooth Low Energy
• Privacy: Noise Indicator used for measuring sound pressure level only, no privacy concerns (only enabled for Airthings for Business)
• Threshold levels: Radon (pCi/L), ≥4 pCi/L, ≥2.7 and (4 pCi/L, (2.7 pCi/L / Radon (Bq/m3), ≥150 Bq/m3, ≥100 and (150 Bq/m3, (100 Bq/m3 / Particulate matter (PM2.5): ≥25 μg/m3, ≥10 and (25 μg/m3, (10 μg/m3 / Carbon dioxide (CO2): ≥1000 ppm, ≥800 and (1000 ppm, ( 800 ppm / Humidity: ≥70 %, ≥60 and (70 %, ≥30 and (60 %, ≥25 and (30 %, (25 % / Temperature (°F): )77 °F, ≥64 and ≤77 °F, (64 °F / Temperature (°C): )25 °C, ≥18 and ≤25 °C, (18 °C / Airborne chemicals (VOC), ≥2000 ppb, ≥250 and (2000 ppb, (250 ppb
• Integrations: IFTTT, Amazon Alexa, Google Assistant

Wave Plus

• Sensors: Radon, particulate matter (PM2.5), Carbon dioxide (CO2), temperature, humidity, airborne chemicals (VOC), air pressure
• Display: 2.9” 296128 pixels ePaper
• Visual indicator: Red/yellow/green glow indicator
• Long battery life: Up to 2 years (depends on sensor interval and WiFi router)
• Optional operation on USB-C (runs from batteries if removed)
• Supports wall mounting or placement on table
• Wireless connection: WiFi or Airthings SmartLink (with Hub)
• Bluetooth for on boarding and daily use configuration
• Hub functionality: Enabled when connected with WiFi and USB-C cable is plugged into device (not compatible with Wave Radon 1st Gen SN: 2900xxxx)
• Radon sampling: Passive diffusion chamber
• Detection method: Alpha spectrometry
• Measurement range: 0 – 500 pCi/L / 0 – 20,000 Bq/m3
• Accuracy/precision at 5.4 pCi/L / 200 Bq/m3: After 7 days ~ 10 % After 2 months ~ 5 %
• Sensor sampling interval: 5 minutes
• Sensor Resolution: Temperature ∓ 0.1°C / F, Humidity ∓1%, Pressure ∓0.15hPa
• Initial calibration time: VOC ~7 days: CO2 ~7 days
• CO2 details: NDIR Sensor (Non-Dispersive Infra-Red): Measurement range 400–5000 ppm, Optimum Accuracy ±50ppm ±3% within 10 – 35°C / 50 - 95°F and 0 – 80%RH after initial calibration time
• Particulate Matter (PM2.5) details: Laser scattering based optical particle counter, Particle size detection range: 300 nm to 10 μm, Range: 0~200 μg/m³, Measurement error (PM2.5): 0 ~100μg/m3, ±10μg/m3,100 ~200 μg/m3, ±10%. Calibrated with a GRIMM using cigarette smoke source
• Recommended operating conditions: Temperature: 4°C to 40°C / 39.2°F to 104°F, Humidity: 0% to 85% (non condensing)
• Power: 6 AA batteries or USB-C
• Connectivity: WiFi (2.4 GHz and 802.11b/g/n), Airthings SmartLink & Bluetooth Low Energy
• Privacy: Noise Indicator used for measuring sound pressure level only, no privacy concerns (only enabled for Airthings for Business)
• Threshold levels: Radon (pCi/L): ≥4 pCi/L, ≥2.7 and (4 pCi/L, (2.7 pCi/L / Radon (Bq/m3): ≥150 Bq/m3, ≥100 and (150 Bq/m3, (100 Bq/m3 / Particulate matter (PM2.5): ≥25 μg/m3, ≥10 and (25 μg/m3, (10 μg/m3 / Carbon dioxide (CO2): ≥1000 ppm, ≥800 and (1000 ppm, ( 800 ppm / Humidity: ≥70 %, ≥60 and (70 %, ≥30 and (60 %, ≥25 and (30 %, (25 % / Temperature (°F): )77 °F, ≥64 and ≤77 °F, (64 °F / Temperature (°C): )25 °C, ≥18 and ≤25 °C, (18 °C / Airborne chemicals (VOC): ≥2000 ppb, ≥250 and (2000 ppb, (250 ppb
• Integrations: IFTTT, Amazon Alexa, Google Assistant

In the Box

• AirThings Living Room + Bedroom Indoor Air Quality Monitor
• 6 AA Batteries
• USB C Cable
• Quick Start Guide