Versatile dry contact mode will let you integrate a whole variety of devices into your smart home.
The T2 connects to Aqara Zigbee 3.0 hub supporting popular ecosystems: Matter, HomeKit, Google Home, Alexa, and more.
Thanks to the Interlock mode, the T2 can also be used as a Roller Shade Switch. Let the morning sunshine gently wake you up and start your day.
The T2 incorporates advanced energy monitoring and Power Memory for optimal energy control and uninterrupted operation.
Enjoy peace of mind with T2's smart safety features: overheat/overload protection and customizable power limit.
Converting to wireless switch mode is supported. Thanks to it, the T2 will be able to make an existing wall switch a scene controller and even connect to wired sensors.
The T2 can be installed near the light, behind the switch and even DIN rail mount, making it easy to install in electrical cabinets and other confined spaces.
The versatile design fits round EU wall boxes and other configurations like 86 mm and US-type, enabling usage as a light switch or even behind a wall outlet.
After connecting to an Agara hub, the T2 offers compatibility with various platforms, including HomeKit, Alexa, Google Home, IFTTT, and Matter. It allows traditional devices to become smart and seamlessly integrates them with multiple third-party systems. Forget about the limitations of different protocols and platforms and enjoy a seamless and harmonious smart home experience.
Transforming conventional devices into smart devices, including roller blinds, curtain motors, garage doors, awnings, gates, and electric sliding doors. Automations and scenes that can be triggered by:
The T2 supports dual modes of dry contact and wet contact. In dry contact mode, the open and close pulse signal or the on-off signal can be selected to control motors, garage doors, rolling gates and other equipment. In wet contact mode, intelligent light control can be easily utilized without replacing your original equipment. By disconnecting a red jumper wire, the T2 can be switched from Wet Contact to Dry Contact Mode, which allows you to integrate a variety of devices.
When controlling the garage door, ensure that there is no risk of jamming a person.
To use the T2 as a Roller Shade Switch, the Interlock mode should be strictly enabled.
Utilizing the interlock mode, the T2 allows users to effortlessly and securely connect it to bi-directional motors* Now, it can effectively control tubular motors, work as a roller shade switch, and be the central part of your water leak protection system.
To control the bi-directional motors, please turn on the INTERLOCK mode in settings
Easily turn an existing wall switch into a wireless scene controller that doesn't need to change the batteries.
For example, an arm button for your security system or a wired doorbell. Alternatively, you can connect one or two binary sensors, and use the T2 in automations.
Please notes the wireless switch (sensor) mode requires the Relay to be nowered by AC or 28SV DC. Also, to use the relay with wired sensors, olease make sure the voltage supplied to the relay is supported by the sensor
Wireless Switch Mode are only available in when the relay is powered by AC.Convert to Wireless Switch mode are only available on Agara Home app and are not exposed to third-party ecosystems
The T2 supports overheat and overload protection, which can eliminate the high current shock when the electrical equipment is instantly powered on, thereby ensuring the reliability and longevity of the equipment. When the equipment temperature is abnormal, or the power exceeds 2500W, the device automatically powers off to ensure electrical safety.
The installation of T2 is Intended for users who are famitiar with electrical installation. Advise that you contact a professional clectrician and only use these instructions as a reference.
The T2 comes equipped with a power off memory, which enables the device to remember its last state, in order not to turn the light on suddenly at night in case of a power cut.
T2 also features an electricity consumption monitoring function, which duplicate themselves, which enables an easy reset of the device automation, thus easing concerns regarding sudden power cuts or device resets.
Please note: Energy Monitoring and Power Automations are only available in when the relay is powered by AC Convert to Energy Monitoning and Power Automations are on y ava lable on Agara Home app and are not exposed to third party ecosystems
Thanks to Zigbee wireless protocol, the Relay T2 features an ultra-low idle consumption. In a few years, the total cost of usage for a competing Wi-Fi relay, may surpass one of the Relay T2 significantly.
According to digitatzimmer, 1.4W will result in around 5 USD/Year cost (depends on electricity price)
The small size T2 can be installed near light, behind switch or wall outlet and it also includes a DIN rail energy monitor. Moreover, it is also compatible with both AC and DC power, This feature offers versatility, allowing users to install the device different settings and power sources.
A wall box with a depth of about 60 mm is recommended. In case the existing wall box is not deep enough, you can try to use a wireless kemote switch his, or a surace-mountco or ultra-thin wall Switch to control the Kelay.
The Relay T2 is not a circuit breaker, and its maximum current of 10A does not allow it to control a big part of household circuits
Thanks to the dry-contact mode, the Relay T2 can be used to make your existing garage door smart
IF You arrive within 500 meters from your home
THEN Open the garage door
The garage door opener should be able to be controlled using dry contacts.
Make your boiler smart with the T2. Control it remotely and save energy by integrating it with Radiator Thermostats through Aqara Home or third-party automations.
IF All the Radiator Thermostats are off
THEN Turn off the boiler
IF Presence is detected
THEN Turn on a light switch or a heater connected to the outlet