Pulse Wave Display: columniation display and the waveform display.
Power Requirement: 2x 1.5 V AAA Alkaline battery ( or using the rechargeable battery instead), adaptable range: 2.6 V – 3.6V
Power Consumption: Smaller than 30 mA
Measurement Accuracy: ±2% in a stage of 70%-100% SpO2, and meaningless when the stage being smaller than 70% ±2 bpm during the pulse rate range of 30-99 bpm and ±2% during the pulse rate range of 100~250 bpm. Clinical Trial: SpO2 regression plot & Bland-Altman plot, Refer to Figure 2 & Figure 3.
Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when the pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm during the pulse rate range of 30~99 bpm and ±2% during the pulse rate range of 100~250 bpm.
Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and darkroom is less than 1%.
It’s equipped with a function switch: The product will enter the standby mode when no signal is in the product within 5 seconds.
Optical Sensor: Red light ( wavelength is 660 nm, 6.65 mW), Infrared (wavelength is 880 nm, 6.75 mW)
Accurately measure your blood oxygen level, pulse rate, and perfusion index with our wireless pulse oximeter. Clinically tested.
Wireless and lightweight, the pulse oximeter can be worn on a lanyard during activities and quickly clipped to your finger for a reading, anytime, anywhere.
View your results from our pulse oximeter immediately on the device screen. Simultaneously track those results with iHealth’s free mobile health app.
See how your activity affects your oxygen level and pulse pre and post workout!
This device supports the iHealth Remote Patient Monitoring solution.