Due to ongoing flight disruptions across the Middle East, logistics and shipment movement may be impacted, resulting in some delivery delays. We appreciate your patience and understanding.
Tap “Add Device” → “Add” on the LCD Interface of Almond+ or Almond 2015 and plug into a power socket to pair it with the router. Once added, the plug will remain paired even when removed from one socket and added to another.
Add Peanut Plugs to the Almond+ or Almond 2015 to control and monitor appliances from anywhere in the world using our Free Almond iOS and Android apps. Works with washers, dryers, heaters, in-wall air conditioners, fans, TVs, game consoles, etc.
Use the Peanut Plug’s built-in monitor to track how much energy your connected devices use. Concerned that older air conditioners, space heaters, refrigerators, or other appliances are actually energy hogs? Don’t wonder: with Peanut Plugs you’ll know.
Schedule your sensors once and they’ll remember your routine until you change your mind. Tell Almond 3, Almond+ or Almond 2015 to turn on your porch light at 6:00 pm and turn it off at 5:00 am. Ask it to ring the alarm when motion is detected in Armed mode. Or have it alert you when your ambient home temperature falls below a level you specify. It’s like a programmable DVR for your house.
Fully compatible with Almond 3, Almond+ and Almond 2015 routers. (Please note, however, that Peanut Plug is not compatible with the first-generation Almond [2012].)
If the device is powered up with the test button held down for 10+ seconds, the device will reset all Z-Wave settings and leave the network. NOTE: The device will not remain awake after resetting and will go into standby mode