Due to current UAE airspace restrictions affecting shipments, some deliveries may be delayed. We appreciate your patience and understanding.
This battery adapter can load four NP-FZ100 Z-series batteries and supports extended shooting.
This Multi Battery Adapter Kit can connect and supply electric power to a camera that uses either an NP-FZ100 Z-series or NP-FW50 W-series battery. By removing the cover for Z-series battery (figure [A]), the power plate (figure [B]) fits cameras compatible with W-series battery.
This battery adapter can quickly charge up to four NP-FZ100 Z-series batteries via AC adapter within about 480 minutes. Power charge condition is indicated in a 3-level LED when the “remaining battery power” check button is pressed.
DC OUT/CHARGE switch placed at the center of the control panel allows you to choose either supplying power from the batteries or charging the batteries.
Camera/USB selector enables switching between DC OUT destinations to let you choose to supply electrical power to either the camera body or other electronic devices connected via USB ports.
This battery adapter provides three screw sockets on both top and bottom of the unit (a total of 6 sockets), allowing a flexible rig setup using a mounting plate and screws.
If you remove battery protector and put battery port covers into place, Multi Battery Adapter turns into a smaller easy-to-carry adapter for two batteries.