A low latency, analog keyboard in an 80% layout, packed with cutting edge features like True 8kHz polling, Rapid Trigger and our latest innovation: Rappy Snappy.
We’ve applied everything we’ve learned so far, making the 80HE our most complete keyboard yet. With several new elements improving the sound, adding new features that enhance your gaming performance and implementing true 8kHz polling to make it our fastest keyboard to date.
The Wooting 80HE detects full switch motion with 0.1mm accuracy from start to end. Every single key outputs an analog signal that can be used for numerous features that enhances your typing and gaming experience.
There is no compromise to be made in what a regular ol’ keyboard might have to offer. Welcome to the future.
The 80HE supports up to 8kHz USB polling while also scanning every analog key position at that same rate, providing you with a True 8kHz polling experience. This lowers your keyboard latency to only 0.125ms.
Eliminate the slowest element in input latency; the initial key press travel before key activation. You have full control over your actuation point from 0.1 to 4.0mm.
Configurable per key in 0.1mm steps, you can customize each key towards your playstyle.
Eliminate the second slowest element in input latency; return key press travel before key deactivation. Rapid Trigger dynamically changes the actuation and deactivation point. Your keys will activate when you intend to press them and deactivate when you intend to let go.
You can repeat a key press mid motion without needing to surpass a fixed reset or actuation point for rapid presses.
Rappy Snappy monitors at least 2 selected keys and activates the key pressed the furthest. When combined with Rapid Trigger, it'll compare the keys only when in an active state. Allowing pre-pressing and faster activation on opposite key release. When both are active at the same depth, it'll resort to your selected SOCD resolution. This enhances your (counter) strafing, bunny hopping, and block/parry/combo timing in various games.
The PCBA and switch plate are held together by a silicone gasket. This absorbs impact, resulting in less noise and a softer feel when you type.
The PC plastic switch plate softens the overall typing experience by muting more of the higher frequencies and placing an emphasis on "thock".
The Wooting 80HE is equipped with screw-in stabilizers to eliminate rattle. They’re also replaceable with most third-party screw-in and clip-in stabilizers.
One bar, ten squares, a thousand ways to communicate with you. This is your 80HE talking in abstract about what you need to know. From profiles to active Rappy Snappy, or just let it blend, and give your 80HE character.
Per-key configurable RGB, various (analog) RGB effects, and super duper brightness. It’s all there to satisfy your RGB needs or turn them off.